Cheap bho vacuum drying oven for sale
Our best-selling vacuum oven models are: DZF-6010 vacuum drying oven, DZF-6050 vacuum drying oven, DZF-6090 vacuum drying oven, etc. They are all made of 304 stainless steel, with high vacuum in the oven and fast drying speed.
Features of vacuum drying oven:
●The vacuum drying oven adopts streamlined arc design, the shell is made of cold-rolled steel plate, and the surface is electrostatic sprayed.
●The temperature control system of this machine is designed with a microcomputer single-chip microcomputer, which has the functions of temperature control, timing and over-temperature alarm.
●Using dual-screen high-brightness digital tube display, the displayed value is accurate and intuitive, with superior performance, and touch-type buttons to set and adjust parameters.
●The vacuum drying oven has timing and timing functions.
●The inner container of the vacuum drying oven is made of stainless steel, and the semi-circular four-corner design is more convenient for cleaning.
●The tightness of the cabinet door can be adjusted arbitrarily by the user. The integrally formed silicone rubber door seal ensures a high vacuum in the cabinet.
●The working room of the vacuum drying oven is a rectangular structure, and the door adopts a toughened, bulletproof double-layer glass door, so that the observation room can make the objects cultivated in the observation room clear to users.
Specifications of BHO vacuum drying oven:
1. Compartment layer: divided into two layers inside, with two mesh plates, which can be movably drawn out; box structure: one-piece type, vacuum pump is placed in the lower part of the machine;
2. Panel installation: The control panel is installed under the machine;
3. Door opening method: single open from right to left;
4. Visible window: The door has a visible window, specification W250×H300mm;
5. The material of the inner box is: 304 stainless steel industrial plate; the inner box is strengthened to prevent deformation after vacuuming;
6. The outer box material is: cold-rolled steel plate, 1.2mm thick, and the surface is painted;
7. The insulation material is: high temperature resistant rock wool, the insulation layer is 100mm thick, and the insulation effect is good;
8. Install movable casters with brakes, which can be pushed arbitrarily;
Precautions for the use of BHO vacuum drying oven:
When the vacuum box does not need to be continuously pumped, the vacuum valve should be closed first, and then the vacuum pump motor power supply, otherwise the vacuum pump oil will be poured into the box.
When taking out the processed items, such as the flammable items being processed, the temperature must be cooled below the combustion point before putting in air to avoid oxidation reaction and burning.
It is forbidden to put explosive materials to dry.
If the drying time is long and the vacuum degree drops, it needs to be pumped again to restore the vacuum degree. You should first turn on the vacuum pump motor switch and open the vacuum valve.
After the vacuum is released, it is not easy to open the box door immediately because the sealing ring and the glass door are tightly deformed. It takes about 30 minutes to open the box door.
