High pressure hydrothermal autoclave reactor
High pressure reactor manufacturer is also called polymerization reactor, digestion tank, high-pressure digestion tank, high-pressure tank, reactor, pressure melting bomb, digestion tank, hydrothermal synthesis tank, and experimental reactor.
The working principle of high pressure hydrothermal autoclave reactor:
The hydrothermal synthesis reactor is a closed container that can decompose insoluble substances. It can be used for atomic absorption spectroscopy and plasma emission analysis in the pretreatment of dissolving samples: it can also be used for small-dose synthesis reactions. It can also use strong acid or alkali in the tank and the high temperature and high pressure airtight environment to achieve the purpose of rapid digestion of insoluble substances. . Do sample pretreatment in chemical analysis methods such as gas phase, liquid phase, plasma spectrum mass spectrometry, atomic absorption and atomic fluorescence. It is a right-hand man to digest samples when determining trace elements and trace elements. It can be used in lead, copper, cadmium, and zinc. It can be used in the determination of heavy metals such as calcium, manganese, iron, mercury, etc., and can also be used as a style that can withstand high temperature and temperature rise and increase pressure, and can quickly and without damage dissolve in a style that is difficult to dissolve under normal conditions and styles that contain volatile elements.
The composition of high pressure hydrothermal autoclave reactor:
The hydrothermal synthesis reactor is composed of a kettle body, a kettle cover, an upper gasket (both front and back are flat), a lower gasket (with protrusions on one side), an inner lining (PTFE or PPL material), and an afterburner.
Features of high pressure hydrothermal autoclave reactor:
1.High temperature resistance: PTFE lining is recommended to be used within 180°C, and PPL lining is recommended to be used within 250°C
2.Low temperature resistance: -196℃ can keep 5%
3.Corrosion resistance: resistance to acid, alkali, strong alkali, aqua regia and various organic solvents
4.Insulation resistance: dielectric performance has nothing to do with temperature and frequency
5.High lubrication: low friction coefficient in solid materials
6.No sticking: No sticking to any substance, strong self-lubricity, the coefficient of friction in solid materials is 0.04
7.Non-toxic: It is physiologically inert and can be implanted in the human body; it is resistant to aging and can be used in the atmosphere for a long time
8.Anti-pollution: low blank value of metal elements, lead content is less than 10-11g/ml
